Snap-in Krone Jacks (Pack of 10)

Snap-in jacks that come with standard Krone type connectors

For use with empty socket face plates and patch panels found on this page

Price

Part No.

£34.99

J301(40)

Mini Cat 5e Socket
(Requires Snap-In Jack)

Single port socket for Snap-in jacks (Krone or tool-less types as shown above).

NOTE: Port is on base of socket not on the front!

Price

Part No.

£9.99

SO51(11)

Cable Tester

Low cost cable tester for BNC and RJ4 cables. Tests for shorts, reversals or open connections. LED for each pair of wires. Includes battery and carry case

Price

Part No.

£22.99

T005(5)

Snap-in Tool-less Jacks (10 Pack)

Snap-in unshielded tool-less keystone jacks.

Note: You will also need a pair of flush wire cutters to cut the cable correctly (T003).

Click here for wiring diagram

Price

Part No.

£22.99

JWT201(8)

Mini Cat 5e Double Socket
(Requires Snap-In Jack)

Twin port socket for Snap-in jacks (Krone or tool-less types as shown above).

NOTE: Ports are on base of socket not on the front!

Price

Part No.

£34.99

SO52(12)

CAT 5e Master Adapter

Allows connection of BT plugs to RJ45 sockets over your structured CAT 5e cabling network
 

Price

Part No.

£5.99

ZEB-MA (50)

RJ45 to 25 Pin D-Connector

Adaptor to convert RJ45 plug to 25 pin D- Connector over structured CAT 5e cabling. 8 wires can be inserted into which ever pins are required

Price

Part No.

£2.50

HC-25B8F

RJ45 to 9 Pin D-Connector

Adaptor to convert RJ45 plug to 9 pin D- Connector over structured CAT 5e cabling. 8 wires can be inserted into which ever pins are required

Price

Part No.

£1.99

HC-9B8M

CAT 5e Doubler (2 x Analogue)

Adaptor that allows you to split a sinlge CAT 5e socket into 2 voice/analogue ports

Note: One required for each end of cabling

Price

Part No.

£5.99

T-MOD3U2(17)

Female to Male Coupler (8 pin)

Very low cost coupler with resistor for terminating PABX system S0-BUS/ ISDN at end of structured cabling

Price

Part No.

£3.50

HC-201(16)

Single Port Empty Socket Faceplate
(Pack of 10)

Empty single port socket faceplate for Snap-in jacks (Krone or tool-less types as shown above)

Note: Does not include back box

Price

Part No.

£17.50

SO41(15)

4 Port Empty Socket Faceplate (Pack of 10)

Empty 4 port socket faceplate for Snap-in jacks (Krone or tool-less types as shown above)

Note: Doesn’t include backbox

Price

Part No.

£40.50

SO44(13)

305m Box of Cat 5e Unshielded Cable

300 metres of solid core unshielded category 5e cable for installing your own structured cabling network for voice and data

Price

Part No.

£52.99

DUR-305M

RJ45 Boots (Pack of 10)

Clip together boot for RJ45 plugs. Ideal for custom made patch cables to protect the plug and cable connection

Price

Part No.

£3.50

C101(6)

Economy Wire Strippers

Easy to use cable stripper for flat or multi-core cables from 3.5mm to 9mm diameter - Just clamp onto the cable and twist 3 times

Price

Part No.

£6.99

T004(3)

RJ45 Crimp Tool

Low cost solution for making your own cords/patch leads using RJ45 plugs

Price

Part No.

£11.50

CT208(51)

Doubler (1x10-BaseT Data/1xAnalogue)

Adaptor that allows you to split a sinlge CAT 5e socket into 2 ports: 1 for voice/ analogue and other for 10-BaseT network connection

Note: One required for each end of cabling

Price

Part No.

£5.99

T-MOD3U4(9)

Female to Female Coupler (8 pin)

Coupler for linking two male RJ45 patch cables together (Has clips to enable it to be mounted into empty patch panels), available in 7 different colours

Price

Part No’s

£4.99

C100BLK(71), C100BLU(70), C100GRN(69), C100ORG(69), C100WHT(1), C100YLW(71), C100RED(70)

Dual Port Empty Socket Faceplate
(Pack of 10)

Empty dual socket faceplate for Snap-in jacks (Krone or tool-less types as shown above)

Note: Does not include back box

Price

Part No.

£22.99

SO42(14)

3 Port Socket Faceplate with Krone Connectors

3 Port Socket faceplate with Krone connectors.

Remember to order a krone punch down tool (At bottom of this page)

Price

Part No.

£5.99

SO33

100m Roll of Cat 5e Unshielded Cable

100 metres of solid core unshielded category 5e cable for installing your own CAT 5e structured cabling network for voice and data

Price

Part No.

£22.99

DUR-100MSO

RJ45 Plugs (Pack of 10)

RJ45 plugs for solid or stranded cable (Use crimp tool below to crimp to cable)

Buy some CAT 5e cable, these plugs and a crimp tool to make your own patch leads

Price

Part No.

£3.50

P8WSO(6) (solid cable)
P8WST(7) (stranded)

Economy Flush Wire Cutters

Hardened carbon steel cutters for wires and cables. Specifically designed to cut wires flush so that they can be inserted into our tool-less keystone jacks

Price

Part No.

£4.99

T003(4)